communication switch
英 [kəˌmjuːnɪˈkeɪʃn swɪtʃ]
美 [kəˌmjuːnɪˈkeɪʃn swɪtʃ]
网络 通讯开关
双语例句
- A Research on Real-time Communication of the Full-Duplex Switch Ethernet based on the Priority Management
优先级管理的全双工交换式以太网实时通信 - The principles used to distinguish the quality of communication switch power
判别通信开关电源优劣的原则 - Secondly, the hardware design of Dual CPU Hot-redundancy is completed with in this paper, which is based on the speed governer project. The hardware includes communication modules and bus switch electric circuit.
第二，根据容错调速器总体框架完成双机热备份硬件模块设计，包括通讯模块和总线切换电路模块硬件设计； - Research of Key Technologies in Group Communication over Packet Switch Networks
包交换网络群组通信关键技术研究 - On the basis of the analysis to the signal condition of each controlling end the communication process and the loop switch principle was also described.
结合各控制端对应信号状态的分析，描述了系统通信流程和环路切换原理。 - The Performance Analysis of Communication Network Switch on the M/ M/ s Queue with Two Priorities
带有两个优先权M/M/s排队的通信网交换性能分析 - Via constructing message receiving and resolving process for IEC104, data communication command and store switch ( gateway operation) were designed, implemented and integrated.
通过构造IEC104报文收发和解析流程，设计、实现并集成了基于双环冗余网的数据通信信令和存储交换（网关操作）机制； - Discussion on the operation mode of communication high frequency switch power supply
通信高频开关电源供电运行方式的探讨 - Microcomputer/ Terminal Remote Communication MODEM for Telephone Switch Network
微型机/终端电话远程通信的调制解调器 - In these years the quick development of fabric communication technology make the switch system becoming the barrier of modern high speed communication network. So study, design and manufacture high speed switch system are very important for modern high speed communication network.
这几年光纤通讯技术的飞速发展使得目前高速通讯网络性能的瓶颈集中在高速交换系统，研究、设计和制造高速交换系统对目前高速通讯网络具有极其重要的意义。 - The detailed hardware structure design scheme is provided in this paper, which carries out all functional circuit designs such as data collecting 、 signal processing 、 data communication 、 switch shift between manual control and program control 、 rudder control.
本文给出了较为详细的硬件电路结构设计方案，实现了信号采集、信号处理、数据通信、手遥程控切换、舵机控制等电路功能设计。 - The complete outside system includes the MCU controlling and handling circuit, keyboard control, LCD display, the sending circuit, the receiving circuit, fee serial communication interface, the analog switch controlling circuit and the power supply management circuit etc.
完整的体外系统包括单片机控制处理电路、键盘控制和LCD显示、信号发射电路、信号接收电路、串行通信电路、模拟开关控制电路以及电源管理电路等。 - In order to improve the efficiency of 802.1X protocol on the switch, the cross-hash table and parallel communication between switch and authentication server are used.
为了提高交换机中802.1X协议的效率，采用了十字哈希表这样一种数据结构，实践证明它提高了查找的效率。在与认证服务器的交互过程中采用了并行交互的设计。 - This system, being two VAX I hosts designed, respectively connects with communication transfer switch of S/ 3 system via RS-232 port and with communication concentrated module through modem. The communication network server can achieve the function of all files-in-share.
该系统有两台VAX主机，通过RS&232通信口与S/3系统的通信转换器相连，再经调制解调器与前置通信机相连，通过网络服务器实现文件共享。 - The development of Internet makes the communication and cooperation switch to superhighway of information, breaking boundary in time and region," Design room without wall "comes into being.
互联网的发展使业主与设计师之间的交流合作走上信息的高速公路，打破了时间、地域的界限，“无墙设计室”得以诞生。 - This is used for all kinds of experiments, including network foundation, organization of network, Web/ FTP service and computer network communication. Cell switch, frame relay, DDN, and ATM are included in these experiments.
实验室可用于网络基础、组网、WebFTP服务、计算机网络通讯等多种实验，包括DDN、ATM、信元交换、帧中继交换等。 - This paper presents a practical technique about microcomputer/ terminal remote communication MODEM for telephone switch network. This technique affords reliable connection and transmission.
本文讨论了微型机/终端在电话交换网上通信用调制解调器（MODEM）的实用技术，以保证可靠的连接与传输。 - Data transmission section is based on the design and realization of the RS232/ CAN conversion card and remote/ on-spot communication switch card;
数据传输部分主要是以RS232/CAN转换卡及远程/现场通信切换卡的设计与实现； - SCM Multi-Host Communication and its Application in Switch System
单片机多主通讯及其应用 - Firstly the construction of automatic communication switch-ing networks in intelligent buildings is discussed; then related technologies and their applications of ATM network systems are mainly introduced.
文章首先对智能大厦通信自动化交换网络的组成作了论述：然后主要介绍了ATM网络系统的相关技术及其应用。 - At present, adoptive representative switching mode in communication network ways includes circuit switch, packet switch, ATM switch and IP switch.
目前在通信网中所采用的交换方式有代表性的主要有：电路交换、分组交换、ATM交换及IP交换。 - The Communication Protocol of Boundary Load Switch Monitoring System defines the interactive behavior between the monitoring system software and the switch controllers.
分界开关监控系统通信协议定义了监控系统软件与开关控制器之间的交互行为规范。 - Meanwhile, slow and fast light, third order nonlinear effect and such optical effects have many potential applications in the areas of quantum communication, all-optical switch, information transmission and so on.
与此同时，超快、超慢光以及三阶非线性效应等光学效应在量子通讯、全光开关、信息传输等领域存在着极大的应用前景。 - As the core of communication network, switch plays a role which can not be replaced for the development of modern communication technology.
交换机作为通信网络的核心，对现代通信技术的发展起着巨大的推动作用。 - In the category of communication power supply, Switch Mode Power Supply ( SMPS) has supplanted the linear and phase controlled supply, with the advantage of power conversion, high efficiency, wide steady voltage, large ratio of power-volume plus light weight.
在通信电源中，由于开关电源具有功率转换、效率高、稳压范围宽、功率体积比大、重量轻等特点，已经取代线性电源、相控电源成为新一代通信电源的主体。 - The hardware used in the system is designed, including the resonant inductor, optical fiber communication systems, switch circuit and measurement circuit.
根据所设计的系统框图，设计了系统所采用的硬件，包括谐振电感、光纤通信系统、开关电路及测量电路等，接着用研制完成的系统对带有人为设置缺陷的电力电缆进行了模拟试验。 - Magnetic core inductance is often applied in RF communication system and switch power supply, to reduce cost and increase the success rate, usually making simulation before experiment.
在射频通信系统和开关电源中经常用到磁芯电感，为了减小成本和提高实验成功率，在实验之前通常先对电路进行仿真。 - Therefore, to the monitoring system, it is very important to ensure the reliability and real-time of the GPRS/ Internet communication. Secondly, ensure the correctness of the Communication Protocol Of Boundary Load Switch Monitoring System.
因此，对监控系统而言，保证GPRS/Internet通信的可靠性和实时性至关重要。其次，要保证分界开关监控系统通信协议实现的正确性。 - Focus on the design of wireless transmission, power supply circuit, data acquisition, wireless communication, PWM dimming and switch control function module about measurement and control system hardware.
重点设计了测控系统硬件无线传输、电源电路、数据采集、无线通讯、PWM调光和开关控制功能模块。